Jim Dunlop Cry Baby Wah-Wah Pedal
from Jim Dunlop
The original Crybaby Wah pedal. This is the original wah-wah pedal used to create many classic rock sounds.
The CRYBABY® has been a standard in the world
of music since its introduction in the late 1960's. Its
rugged construction and efficient design will give
years of outstanding performance.
OPERATING INSTRUCTIONS • By rocking your foot back and forth on the
pedal, you can change the effect that the
CRYBABY® has on the tone of your instrument
instantaneously. Toe down will give you more
treble, heel down will give you more bass. The
speed and amount of effect you use depends on
your style of playing. • When placing the pedal in one position, you will
hear a boost in that particular frequency. This
boost can be used to add sustain and create
feedback of a desired overtone.
Notice: This unit is shipped from the factory
without a battery to prevent possible damage
from leakage. A 9-volt battery
must be installed for operation, We recommend a high
quality alkaline battery. The adapter jack
requires a 5.5/2.1mm coax plug. Most standard
9VDC AC adapters with greater than 20ma
current capability will work. POWER ADAPTOR NOT INCLUDED.
To install the battery, remove 4 screws from
the rubber feet securing the bottom cover and
insert the battery.
SIMILAR & RELATED PRODUCTS OTHER CUSTOMERS OFTEN BUY:
9V Dunlop ECB-003 PSU part replacement power supply adaptor - UK plug
Ernie Ball 2221 Regular Slinky 10-46 String Set